With both the ActivBoard and the computer switched on, hold the ActivPen lightly on the ActivBoard, without pushing in the ActivPen nib. The cursor, on the ActivBoard, should line up with the tip of the ActivPen. If it does not, you need to calibrate the ActivBoard using the steps below.
There are two ways to calibrate your ActivBoard. How you calibrate the ActivBoard depends on the type of ActivBoard you have:
After calibrating, check that the tip of your ActivPen lines up with the cursor on the ActivBoard. If it does not, reset the board by switching it off for thirty seconds. Then switch it on and try calibrating again, or contact technical support.
Article ID: 418
Created On: Wed, Sep 8, 2010 at 7:54 AM
Last Updated On: Thu, Apr 2, 2015 at 10:15 AM
Authored by: Maija Stein
Online URL: https://kb.nsd.org/article-418.html